Baldor Spindles Tapered 3/8" Arbor Hole Friction Grip Dental Lathe Motor Set R&L

Description

BALDOR TAPERED SPINDLES 3/8"
SET OF 2 RIGHT & LEFT HAND
FRICTION GRIP  Fits Baldor POLISHING LATHE
BALDOR DENTAL LATHE MOTORS
The spindle is made to use with a
Baldor Dental Polishing motor.
Spindle is fits 3/8" Polishing lathes
has an inside diameter that is tapered to fit on the tapered shaft of a Baldor Dental Polishing motor. These are specifically made to fit Baldor motor shafts since they are not straight, but have a slight taper.
Spindles are a friction fit, they are pushed on to the shaft of the Baldor motor, to properly secure them onto the shaft, lightly tap with a soft mallet or a piece of wood.
To remove, just use the screw off spindle remover on the motor by simply unscrewing and turning it
until the spindle is pushed off of the tapered shaft.
Spindles is made
of cold rolled steel is machined to close tolerances, made in
U.S.A.
Spindles have a 3/8" Tapered arbor hole to work on the Baldor Lathes with 3/8" shaft motors.
The spindle arbor hole has a slight tapered to fit and be held on the Baldor Motor.
Note: Spindle does not have tightening screws.
FEATURES:
·
Precision Quality
·
Machined - High Speed Lathe
·
Made from 3/4" Stock Material
.
SPECIFICATIONS:
JETS Product # 1603-112370 &
1603-212370
·
Material:
Cold Rolled Steel
·
Overall Length:
3-3/8" - 87mm
·
Spindle Body Length:
1-3/8" - 35mm
·
Spindle Tapered Length:
2" - 51mm
·
Arbor Hole
:
3/8" Tapered Friction Grip to Shaft
·
Weight:
2.75oz. - 478gr
NOTE: The Last Picture show spindle on the Baldor Lathe... Sale is for a Set of Right and Left Spindles.
SHIPPING:  Via USPS FIRST CLASS MAIL
NOTE: Visit
JETSTOOLS
our ebay Store where you can see listings of various Commercial Grades of Spindles, Arbors, Miniature Mandrels and Holders along with more
J
ewelers
E
quipment
T
ools and
S
upplies
.
JETS Inc.
B8  914 CKP M