4PCS Suspension Kit Ball Joints Front Upper&Lower For 1959-1970 Chevrolet Impala

Description

1.Fitting the Following vehicle:
1958-1970 Chevrolet Bel Air  1958-1970 Chevrolet Biscayne  1958-1970 Chevrolet Brookwood  1968-1970 Chevrolet Caprice  1961-1964 Chevrolet Corvair Truck  1963-1982 Chevrolet Corvette  1959-1970 Chevrolet Impala  1969-1970 Chevrolet Kingswood  1969-1970 Chevrolet Townsman
2.Package Includes:
2 x Part # Front Lower Ball Joint - K6035 2 x Part # Front Upper Ball Joint - K6034
3.Note Although some parts have grease fittings, other parts are factory sealed, but do not affect the fit and quality of the parts.
4PCS Suspension Kit Ball Joints Front Upper&Lower For 1959-1970 Chevrolet Impala
1.Fitting the Following vehicle:
1958-1970 Chevrolet Bel Air
1958-1970 Chevrolet Biscayne
1958-1970 Chevrolet Brookwood
1968-1970 Chevrolet Caprice
1961-1964 Chevrolet Corvair Truck
1963-1982 Chevrolet Corvette
1959-1970 Chevrolet Impala
1969-1970 Chevrolet Kingswood
1969-1970 Chevrolet Townsman
2.Package Includes:
2 x Part # Front Lower Ball Joint - K6035
2 x Part # Front Upper Ball Joint - K6034
3.Note
Although some parts have grease fittings, other parts are factory sealed, but do not affect the fit and quality of the parts.
10 Year Warranty
Please check above compatibility list to make sure it fits your vehicle.
If you want to find more about suspension kits,clicking
our store
.
Ball Joint
Ball joints may be grouped into two classifications, load carrying and non-load carrying. Ball joints may be manufactured with forged, stamped, cold-formed, or screw-machined housings. The coil spring is seated on the control arm to which the load-carrying ball joint is attached. For example, when the coil spring is mounted between the lower control arm and the chassis, the lower ball joint is a load-carrying joint. In a torsion bar suspension, the load-carrying ball joint is mounted on the control arm to which the torsion bar is attached. A load-carrying ball joint supports the vehicle weight.
Ball Joint Replacement Guideline:
If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension.
Picture(A)
The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty.
Picture(B)
1.Raise the vehicle and remove the front wheels.
2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes.
Picture(C)
3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts.
Picture(D)
4.Loosen and remove the fixing nut of the ball joint on the steering knuckle.
Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket.
Picture(E)
5.Remove the bad or worn ball joint from the control arm.
6.Loosen the compression ball joint on the steering knuckle using a suitable special tool.
Picture(F)
7.Clean the cone connection.
Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface.
Picture(G)
8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts.
9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer.
10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary.
11.Finally, carry out a test drive.
Frequently Asked Questions
(1).How will I know that I have to renew my ball joint parts? Or replace them?
If your ball joint fails, you will listen to a strange sound while driving. And that sound may help you to realize that your ball joint has failed and you have to renew them.
(2).What happens if a ball joint breaks?
When a ball joint breaks, you will hear a mysterious noise inside your car wheel.
Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control.
If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious.
Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car.
(3).Are worn ball joints dangerous?
Yes, it can be quite dangerous. Because, a worn ball joint causes suspension damage, inspection failure, and breakage of related parts.
It might make your front suspension come apart while driving, so the wheels move in whatever direction inertia takes them. That can lead to a fatal accident.
(4).What happens if I don't replace ball joints?
If you don't want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new.
(5).Do I need to grease new ball joints?
I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card.
Item Specifics
Placement on Vehicle
Front
Type
Ball Joint
Universal Fitment
No
Suspension Grade
Standard
Items Included
Mounting Hardware
Custom Bundle
Yes
Interchange Part Number
K6034 K6035
OE/OEM Part Number
Suspension Ball Joints Kit Assembly
Superseded Part Number
Front Driver and Passenger Side Replacement
Manufacturer Warranty
10 Year
Brand
ECCPP
UPC
707427982451
Manufacturer Part Number
E80125502CP
Adjustable
Yes
Greasable or Sealed
Greasable
Kit Included
Surface Finish
Premium Quality
Kit Included
4 Pieces
Cross Reference Part Number
For Chevrolet Bel Air?Biscayne Brookwood Caprice Corvette
Cross Part Number
For Corvair Truck?Impala Kingswood Townsman
Partlink Number
1958-1973 1974 1975 1976 1977 1978 1979 1980 1981 1982
Bundle Description
Ball Joint,Ball Joint
Features
Greasable
Finish
Coated
Cotter Pin Hole
Yes
Material
Alloy Steel
Mounting Style
Bolt-On
Item Specifics
Placement on Vehicle
Front
Type
Ball Joint
Universal Fitment
No
Suspension Grade
Standard
Items Included
Mounting Hardware
Custom Bundle
Yes
Interchange Part Number
K6034 K6035
OE/OEM Part Number
Suspension Ball Joints Kit Assembly
Superseded Part Number
Front Driver and Passenger Side Replacement
Manufacturer Warranty
10 Year
Brand
ECCPP
UPC
707427982451
Manufacturer Part Number
E80125502CP
Adjustable
Yes
Greasable or Sealed
Greasable
Kit Included
Surface Finish
Premium Quality
Kit Included
4 Pieces
Cross Reference Part Number
For Chevrolet Bel Air?Biscayne Brookwood Caprice Corvette
Cross Part Number
For Corvair Truck?Impala Kingswood Townsman
Partlink Number
1958-1973 1974 1975 1976 1977 1978 1979 1980 1981 1982
Bundle Description
Ball Joint,Ball Joint
Features
Greasable
Finish
Coated
Cotter Pin Hole
Yes
Material
Alloy Steel
Mounting Style
Bolt-On
Discount
Targeted Disounts Terms
(1).Targeted Discount Terms only apply to auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link.
(2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items.
(3).Targeted Discount will be refunded from buyer's payment, which means ECCPPAUTOPARTS won't provide any extra targeted discounts if full refund is issued.
Targeted Shipping Discount
(4).
Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV).
If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items.
Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes.
(5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received.
(6).ECCPPAUTOPARTS has the final power of interpretation of all the above Targeted Discount Terms and Procedures.
Shipping
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
(1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available.
(2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable.
(3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available.
(4).Global Shipping Program is temporarily not available due to the reason for package dimensions.
(5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received.
(6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received.
(7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of 0 or more.
Warranty
Items valued over on eBay that include a warranty or service contract must contain additional details in seller's listing description.
10 Year Warranty Terms and Procedures
(1).The warranty terms only apply to the auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link.
(2).ECCPPAUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements.
(3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period.
(4).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests.
(5).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests.
(6).ECCPPAUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly.
(7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately.
(8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price.
(9).ECCPPAUTOPARTS has the final power of interpretation of the above 10 Year Warranty Terms and Procedures.
Return
(1).Most of items support 60 Days Money Back Guarantee.
(2).Refunds will be credited within 2 or 3 business days after returned item(s) is received.
Best Sales
Front Or Rear Wheel Bearing Hub For Buick Rendezvous Lesabre Chevrolet Impala
USD 47.13
Pair Front Or Rear Wheel Hub Bearing For Chevy Impala Pontiac Grand Prix Venture
USD 63.24
12V Universal Low Pressure 5-9 PSI Electric Fuel Pump Installation Kit E8012S
USD 14.99
2x For 1999 2000 2001 2002 2003 2004 2005 2006 2007 Ford F150 Remote Car Key Fob
USD 13.36
For 1988-98 Chevy GMC 1500/2500/3500 Towing Manual Side View Mirrors Truck Pair
USD 76.99
Newly Listed
11pcs Front Tie Rod Ends Ball Joints Sway Bars For Escalade GMC K1500 K2500
USD 76.69
4Pcs for 98-03 Sienna Black Exterior Left Right Side Front Rear Door Handles
USD 29.42
Backup Reverse Camera For 11-14 Ford F-150 V6 V8 Rear View Parking CL3Z-19G490-D
USD 92.99
ECCPP 2x Black Door Handle For Nissan 02-06 Altima Rear Right Left Outside Side
USD 23.29
50x T5 17 74 Red Instrument Panel Dash Light Halogen Mini-Wedge Bulbs For Ford
USD 9.99
4PCS Suspension Kit Ball Joints Front Upper&Lower For 1959-1970 Chevrolet Impala
1.Fitting the Following vehicle:
1958-1970 Chevrolet Bel Air
1958-1970 Chevrolet Biscayne
1958-1970 Chevrolet Brookwood
1968-1970 Chevrolet Caprice
1961-1964 Chevrolet Corvair Truck
1963-1982 Chevrolet Corvette
1959-1970 Chevrolet Impala
1969-1970 Chevrolet Kingswood
1969-1970 Chevrolet Townsman
2.Package Includes:
2 x Part # Front Lower Ball Joint - K6035
2 x Part # Front Upper Ball Joint - K6034
3.Note
Although some parts have grease fittings, other parts are factory sealed, but do not affect the fit and quality of the parts.
10 Year Warranty
Please check above compatibility list to make sure it fits your vehicle.
If you want to find more about suspension kits,clicking
our store
.
Ball Joint
Ball joints may be grouped into two classifications, load carrying and non-load carrying. Ball joints may be manufactured with forged, stamped, cold-formed, or screw-machined housings. The coil spring is seated on the control arm to which the load-carrying ball joint is attached. For example, when the coil spring is mounted between the lower control arm and the chassis, the lower ball joint is a load-carrying joint. In a torsion bar suspension, the load-carrying ball joint is mounted on the control arm to which the torsion bar is attached. A load-carrying ball joint supports the vehicle weight.
Ball Joint Replacement Guideline:
If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension.
Picture(A)
The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty.
Picture(B)
1.Raise the vehicle and remove the front wheels.
2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes.
Picture(C)
3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts.
Picture(D)
4.Loosen and remove the fixing nut of the ball joint on the steering knuckle.
Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket.
Picture(E)
5.Remove the bad or worn ball joint from the control arm.
6.Loosen the compression ball joint on the steering knuckle using a suitable special tool.
Picture(F)
7.Clean the cone connection.
Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface.
Picture(G)
8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts.
9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer.
10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary.
11.Finally, carry out a test drive.
Frequently Asked Questions
(1).How will I know that I have to renew my ball joint parts? Or replace them?
If your ball joint fails, you will listen to a strange sound while driving. And that sound may help you to realize that your ball joint has failed and you have to renew them.
(2).What happens if a ball joint breaks?
When a ball joint breaks, you will hear a mysterious noise inside your car wheel.
Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control.
If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious.
Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car.
(3).Are worn ball joints dangerous?
Yes, it can be quite dangerous. Because, a worn ball joint causes suspension damage, inspection failure, and breakage of related parts.
It might make your front suspension come apart while driving, so the wheels move in whatever direction inertia takes them. That can lead to a fatal accident.
(4).What happens if I don't replace ball joints?
If you don't want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new.
(5).Do I need to grease new ball joints?
I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card.
Item Specifics
Placement on Vehicle :
Front
Type :
Ball Joint
Universal Fitment :
No
Suspension Grade :
Standard
Items Included :
Mounting Hardware
Custom Bundle :
Yes
Interchange Part Number :
K6034 K6035
OE/OEM Part Number :
Suspension Ball Joints Kit Assembly
Superseded Part Number :
Front Driver and Passenger Side Replacement
Manufacturer Warranty :
10 Year
Brand :
ECCPP
UPC :
707427982451
Manufacturer Part Number :
E80125502CP
Adjustable :
Yes
Greasable or Sealed :
Greasable
Kit Included :
Surface Finish :
Premium Quality
Kit Included :
4 Pieces
Cross Reference Part Number :
For Chevrolet Bel Air?Biscayne Brookwood Caprice Corvette
Cross Part Number :
For Corvair Truck?Impala Kingswood Townsman
Partlink Number :
1958-1973 1974 1975 1976 1977 1978 1979 1980 1981 1982
Bundle Description :
Ball Joint,Ball Joint
Features :
Greasable
Finish :
Coated
Cotter Pin Hole :
Yes
Material :
Alloy Steel
Mounting Style :
Bolt-On
Item Specifics
Placement on Vehicle
Front
Type
Ball Joint
Universal Fitment
No
Suspension Grade
Standard
Items Included
Mounting Hardware
Custom Bundle
Yes
Interchange Part Number
K6034 K6035
OE/OEM Part Number
Suspension Ball Joints Kit Assembly
Superseded Part Number
Front Driver and Passenger Side Replacement
Manufacturer Warranty
10 Year
Brand
ECCPP
UPC
707427982451
Manufacturer Part Number
E80125502CP
Adjustable
Yes
Greasable or Sealed
Greasable
Kit Included
Surface Finish
Premium Quality
Kit Included
4 Pieces
Cross Reference Part Number
For Chevrolet Bel Air?Biscayne Brookwood Caprice Corvette
Cross Part Number
For Corvair Truck?Impala Kingswood Townsman
Partlink Number
1958-1973 1974 1975 1976 1977 1978 1979 1980 1981 1982
Bundle Description
Ball Joint,Ball Joint
Features
Greasable
Finish
Coated
Cotter Pin Hole
Yes
Material
Alloy Steel
Mounting Style
Bolt-On
Discount
Shipping
Warranty
Return
Feedback
Targeted Disounts Terms
(1).Targeted Discount Terms only apply to auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link.
(2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items.
(3).Targeted Discount will be refunded from buyer's payment, which means ECCPPAUTOPARTS won't provide any extra targeted discounts if full refund is issued.
Targeted Shipping Discount
(4).
Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV).
If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items.
Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes.
(5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received.
(6).ECCPPAUTOPARTS has the final power of interpretation of all the above Targeted Discount Terms and Procedures.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
(1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available.
(2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable.
(3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available.
(4).Global Shipping Program is temporarily not available due to the reason for package dimensions.
(5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received.
(6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received.
(7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of 0 or more.
Items valued over on eBay that include a warranty or service contract must contain additional details in seller's listing description.
10 Year Warranty Terms and Procedures
(1).The warranty terms only apply to the auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link.
(2).ECCPPAUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements.
(3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period.
(4).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests.
(5).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests.
(6).ECCPPAUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly.
(7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately.
(8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price.
(9).ECCPPAUTOPARTS has the final power of interpretation of the above 10 Year Warranty Terms and Procedures.
(1).Most of items support 60 Days Money Back Guarantee.
(2).Refunds will be credited within 2 or 3 business days after returned item(s) is received.
Copyright of ECCPP. All rights reserved.